ÁùºÏ²ÊÖ±²¥¿ª½±

Artificial intelligence (AI) accelerators are essential for tackling AI workloads like neural networks. These high-performance parallel computation machines provide the processing efficiency that such high data volumes demand. With AI playing increasingly larger roles in our lives¡ªfrom consumer devices like smart speakers to industrial applications like automated factories¡ªit¡¯s paramount that we also consider the energy efficiency of these applications. When designing AI accelerators, for example, there¡¯s opportunity to optimize power consumption early in the design cycle.

Indeed, power consumption of AI hardware has become an area of critical concern given the impact on our environment. The , on average, according to OpenAI, an AI R&D company. Researchers from the University of Massachusetts, Amherst, estimated that ¡ªthat¡¯s an amount that five cars can emit over their entire lifetimes. And once an AI model is deployed in the field, it consumes even more energy. AI hardware typically consists of large arrays with up to thousands of tiles (processing elements), requiring billion-plus gate, power-hungry designs. , including lower costs, better battery life, and minimized environmental impact.

Addressing Glitch Power Early in the Design Cycle

Given the symmetric and replicated architecture of AI hardware, it¡¯s very important to find the best possible micro-architecture for glitch early in the design cycle. Now, typically, glitch power is computed when gate-level simulation with timing delays is available¡ªvery late in the flow. At this stage, it¡¯s too late to perform changes to the micro-architecture, take glitch power into consideration as part of the power budget during implementation, or perform specific engineering change orders (ECOs) to reduce glitch power. A better approach is to identify the optimal micro-architecture for glitch at the system level or RTL level. By reducing power for a highly replicated tile, you can generate high energy savings at the chip level.

To identify glitches and also determine the extra power they are consuming, designers need to pay special attention to cell delays and wire delays. Fortunately, there are glitch power analysis and optimization tools that, provided with accurate delay information, can capture these glitches and measure the power consumption caused by the extra switching activity. For example, implementation tools can use the additional toggle generated by glitches to make better decisions that suppress these glitches or minimize their impact on EMIR.

Comprehensive Glitch Power Analysis

In its PrimePower product family, ÁùºÏ²ÊÖ±²¥¿ª½± provides an end-to-end solution that can be run at the SoC/tile level on a real software frame to perform glitch power analysis from RTL to gate. PrimePower RTL computes and reports glitch per hierarchy, enabling identification of instances with high glitch. Using the tool, designers can perform ¡°what if?¡± analysis to reduce glitch power by pointing to the RTL source line of code generating the highest level of glitch¡ªa useful capability for AI and machine-learning hardware.

Delay-/glitch-aware vector generation using RTL simulation is available via the PrimePower solution. The product can generate an SAIF with glitch annotation (IG and TG) and a delay-aware SAIF from an RTL simulation on any given netlist (synthesis output, CTS output, place-and-route output, etc.). The SAIF or FSDB can be used during implementation or ECO for glitch-aware optimizations. In addition, PrimePower gate-level power analysis and golden power signoff can perform glitch power analysis using 0 delay gate-level simulation or timing-aware simulation correlating closely to SPICE power numbers.